“One of the key benefits of using Visual Vessel Design is the ability to use the created 3D model also for CAD engineering. This model gives the user a global overview of designs and calculations, helping to prevent mistakes.”, said Stefan Wesseling, service specialist at NEWES after using Intergraph CAESAR II and Visual Vessel Design in a pipe design project.
NEWES was contracted to perform pipe design for a new power plant with three clinical boilers. The scope included creating a DN500 steam line from the three boilers to the pressure reducing stations that have connections with the existing steam piping systems. This also comprised safety lines to safety valves with blow out lines. In addition, NEWES was asked to create a DN350 feed water line from the boiler feed water tank to the boiler feed water pumps.
All of the systems were to be designed within the PED (European Pressure Equipment Directive) according to the Dutch laws for pressure vessels (RToD).
The three cylindrical boiler connections with low allowable forces and moments made the steam line design especially challenging. The distance between the three boilers was only seven meters and one or two of the boilers could be out of service at times.
In addition, the main obstacle for successful design and implementation of feed water lines were the allowable forces and moments on the feed water pumps. To overcome these challenges, NEWES chose to design an expansion loop between each boiler connection and the main steam line. The system would be checked according various design cases, ensuring compliance with the specified loads and accuracy of the design.
Intergraph Analysis Solutions were chosen for the project mainly due to the reliability and ability to check designs and stresses in accordance to multiple design codes. NEWES also found the user-friendliness and ease of use of the products to be key for efficient project delivery. The ease of use enabled NEWES to start executing the project quickly and the company was ready for production after only a few weeks of training.
NEWES chose to use CAESAR II for all of the stress calculations in accordance with ASME, EN, and RToD codes, whilst Visual Vessel Design was used for the internal pressure calculations according to ASME and EN codes. First, the piping system stresses were checked with CAESAR II and the resulting nozzle loads for the boilers were checked according to the EN13445 with Visual Vessel Design.
The key benefits NEWES realized by using Intergraph software included:
• True international code flexibility: ability to perform stress calculations in accordance with all international design codes.
• Shortened project time due to efficient and accurate pipe stress and pressure vessel analysis.
• Accurate and correct stress and pressure vessel analysis
Curious to learn more? Visit our website for more information.