Executive Manager, CAESAR II Development
One of the tasks after performing analysis in CAESAR II could be to modify the model based on those results. It may be to reduce stress in the pipe or load on some equipment.
Simultaneously having access to both input and output is very handy. Here is how to do it. Once you have analyzed the job, go back to the input and you will see the “CAESAR Tools” toolbar.
The first pyramid icon, as you know, is the load case editor. This icon is active if you have error- checked the model. The second pyramid icon is active if you have analyzed results ready to review. So click on the output reports icon to see the results along with the input.
Then you can do it all over again.